Used Ribbon Blenders

Mixers ribbon are mixing mechanisms used to mix hundreds of products, medicines, fertilizers, resins, cosmetics and flavored coffees. Tthey devices are one of the most common and popular blend into service today. These machines are ideal for use in the pharmaceutical industry for the mixture of fine particles drugs. To choose the right ribbon blender, many factors must be taken into consideration. To increase the productivity of mixture, the key factors for choosing the right mixer are as follows:

Design * Drive: The first factors to consider in feeding ribbon blender are always the product density, moisture content and volume. Specifying the RHD needs effective communication between the equipment manufacturer and the buyer needs to identify key processes.
* Low starting speed: Many ribbon mixers have been manufactured with no provision for starting at low speed. But a top dead load leads to many disadvantages, which increase costs. The buyer now has two options: either choose an engine size that is more than capable of providing peak power needed for mobile mixer or a smaller engine that is good for powering the mixer once it is walk. The first choice is not good and it is unnecessary, since the big engine needs more power and its initial cost is high. The second option is risky because the high torque at startup too stresses the machine and eventually cause maintenance problems. The best solution is to opt for a boot that protects the low-speed mixer. Buyers have many options for this as hydraulic operated, electronic start and variable frequency drives to start the mixer at low speed.
* Mixing Variable Speed: The ability to melt at different speeds is very advantageous. It is required of all R & D request. It is useful in all factories where many products are mixed and the passage is frequently on the processing chain. By adjusting the speed of the tape, you can configure the mixer to achieve the best possible efficiency for each product.
* Direct drive vs. belt drive: Today, a direct drive is usually the most efficient choice. direct drive is extremely reliable and compact. But in some cases, a belt drive offers significant advantages. For example, in a large mixer, the belt may actually be less expensive than a direct drive and belt drive also provides the ability to change speeds later.
Ribbon design and interior finish: The ribbon is an essential element in the design of the mixer. The tape support rods, and the tree must be properly adapted to the physical properties of the product to increase the efficiency of mixing and prevent mechanical failures.
* Seals and gaskets: Recent developments in the shaft seals, packaging systems have ribbon mixer more versatile and reliable. Improving joint integrity is always useful to guard against contamination.

Conclusion: After selecting the desired features, you must contact the manufacturer and do a test on your mixer to tape. Nothing gives you more satisfaction than knowing you have chosen the best design for your needs.

The same article was published in ribbon mixers . For more information on the Indian Pharmaceutical Machineries, please vist Sourcng Medical Guide